Tests in the YAML Config

Here you can see all the supported tests definitions and how to configure them in the YAML config file. A Test Definition is a generic definition of a test. This Test Definition then gets specified in a Test Case. This Test Case is where the parameter(s) of a Test Definition are specified. In this section, you will learn what tests we currently support and how to configure them in the YAML/JSON config file.

Table Tests
Column Tests

Table Tests

Tests applied on top of a Table. Here is the list of all table tests:

Table Row Count to Equal
Table Row Count to be Between
Table Column Count to Equal
Table Column Count to be Between
Table Column Name to Exist
Table Column to Match Set
Table Custom SQL Test
Table Row Inserted Count To Be Between
Compare 2 Tables for Differences
Table Data to Be Fresh [OpenMetadata]

Table Row Count to Equal

Validate the total row count in the table is equal to the given value. Dimension: Integrity Properties:

value: Expected number of rows.

Behavior

Condition	Status
`value` match the number of rows in the table	Success ✅
`value` does not match the number of rows in the table	Failed ❌

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableRowCountToEqual
  parameterValues:
      - name: value
        value: 2

JSON Config

{
    "name": "myTestName",
    "description": "test description",
    "testDefinitionName": "tableRowCountToEqual",
    "parameterValues": [
        {
            "name": "value",
            "value": 2
        }
    ]
}

Table Row Count to be Between

Validate the total row count is within a given range of values. Dimension: Integrity Properties:

minValue: Lower bound of the interval. If informed, the number of rows should be bigger than this number.
maxValue: Upper bound of the interval. If informed, the number of rows should be lower than this number.

Any of those two need to be informed. Behavior

Condition	Status
The number of rows in the table is between `minValue` and `maxValue`	Success ✅
The number of rows in the table is not between `minValue` and `maxValue`	Failed ❌

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableRowCountToBeBetween
  parameterValues:
    - name: minValue
      value: 10
    - name: maxValue
      value: 10

JSON Config

{
    "name": "myTestName",
    "description": "test description",
    "testDefinitionName": "tableRowCountToBeBetween",
    "parameterValues": [
        {
            "name": "minValue",
            "value": 10
        },
        {
            "name": "maxValue",
            "value": 10
        }
    ]
}

Table Column Count to Equal

Validate that the number of columns in a table is equal to a given value. Dimension: Integrity Properties

columnCount: Expected number of columns.

Behavior

Condition	Status
`columnCount` matches the number of column in the table	Success ✅
`columnCount` does not matches the number of column in the table	Failed ❌

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableColumnCountToEqual
  parameterValues:
    - name: columnCount
      value: 5

JSON Config

{
    "name": "myTestName",
    "description": "test description",
    "testDefinitionName": "tableColumnCountToEqual",
    "parameterValues": [
        {
            "name": "columnCount",
            "value": 5
        }
    ]
}

Table Column Count to be Between

Validate the number of columns in a table is between the given value Dimension: Integrity Properties

minColValue: lower bound
maxColValue: upper bound

Behavior

Condition	Status
The number of columns in the table is between `minColValue` and `maxColValue`	Success ✅
The number of columns in the table is not between `minColValue` and `maxColValue`	Failed ❌

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableColumnCountToBeBetween
  parameterValues:
    - name: minColValue
      value: 5
    - name: maxColValue
      value: 10

JSON Config

{
    "name": "myTestName",
    "description": "test description",
    "testDefinitionName": "tableColumnCountToBeBetween",
    "parameterValues": [
        {
            "name": "minColValue",
            "value": 5
        },
        {
            "name": "maxColValue",
            "value": 10
        }
    ]
}

Table Column Name to Exist

Validate a column name is present in the table Dimension: Integrity Properties

columnName: the name of the column to check for

Behavior

Condition	Status
`columnName` exists in the set of column name for the table	Success ✅
`columnName` does not exists in the set of column name for the table	Failed ❌

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableColumnNameToExist
  parameterValues:
    - name: columnName
      value: order_id

JSON Config

{
    "myTestName": "myTestName",
    "testDefinitionName": "tableColumnNameToExist",
    "parameterValues": [
        {
            "name": "columnName",
            "value": "order_id"
        }
    ]
}

Table Column to Match Set

Validate a list of table column name matches an expected set of columns Dimension: Integrity Properties

columnNames: comma separated string of column name
ordered: whether the test should check for column ordering. Default to False

Behavior

Condition	Status
[`ordered=False`] `columnNames` matches the list of column names in the table regardless of the order	Success ✅
[`ordered=True`] `columnNames` matches the list of column names in the table in the corresponding order (e.g. `["a","b"] == ["a","b"]`	Success ✅
[`ordered=FALSE`] `columnNames` does no match the list of column names in the table regardless of the order	Failed ❌
[`ordered=True`] `columnNames` does no match the list of column names in the table and/or the corresponding order (e.g. `["a","b"] != ["b","a"]`	Failed ❌

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableColumnToMatchSet
  parameterValues:
    - name: columnNames
      value: "col1, col2, col3"
    - name: ordered
      value: true

JSON Config

{
    "myTestName": "myTestName",
    "testDefinitionName": "tableColumnToMatchSet",
    "parameterValues": [
        {
            "name": "columnNames",
            "value": "col1, col2, col3"
        },
        {
            "name": "ordered",
            "value": true
        }
    ]
}

Table Custom SQL Test

Write you own SQL test. When writting your query you can use 2 strategies:

ROWS (default): expects the query to be written as SELECT <field>, <field> FROM <foo> WHERE <condition>. Note if your query returns a large amount of rows it might cause an “Out Of Memeory” error. In this case we recomend you to use the COUNT strategy.
COUNT: expects the query to be written as SELECT COUNT(<field>) FROM <foo> WHERE <condition>.

How to use the Threshold Parameter? The threshold allows you to define a limit for which you test should pass or fail - by defaut this number is 0. For example if my custom SQL query test returns 10 rows (or a COUNT value of 10) and my threshold is 5 the test will fail. If I update my threshold to 11 on my next run my test will pass.

When configuring a Table Custom SQL Test, specify the table using the format database.schema.table.
Using only the table name may not work, as it depends on the SQL engine’s requirements.

Properties

sqlExpression: SQL expression
strategy: one of ROWS or COUNT
threshold: an integer defining the threshold above which the test should fail (default to 0 if not specified)

Behavior

Condition	Status
`sqlExpression` returns row <= threshold (default to 0)	Success ✅
`sqlExpression` returns row > threshold (default to 0)	Failed ❌

Example

SELECT
customer_id
FROM DUAL
WHERE lifetime_value < 0;

SELECT
customer_id
FROM DUAL d
INNER JOIN OTHER o ON d.id = o.id
WHERE lifetime_value < 0;

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableCustomSQLQuery
  parameterValues:
    - name: sqlExpression
      value: >
        SELECT
        customer_tier
        FROM DUAL
        WHERE customer_tier = 'GOLD' and lifetime_value < 10000;

JSON Config

{
    "name": "myTestName",
    "description": "test description",
    "testDefinitionName": "tableCustomSQLQuery",
    "parameterValues": [
        {
            "name": "sqlExpression",
            "value": "SELECT  customer_tier FROM DUAL  WHERE customer_tier = 'GOLD' and lifetime_value < 10000;"
        }
    ]
}

Table Row Inserted Count To Be Between

Validate the number of rows inserted for the defined period is between the expected range

The Table Row Inserted Count To Be Between cannot be executed against tables that have configured a partition in OpenMetadata. The logic of the test performed will be similar to executing a Table Row Count to be Between test against a table with a partition configured.

Dimension: Integrity Properties

Min Row Count: Lower bound
Max Row Count: Upper bound
Column Name: The name of the column used to apply the range filter
Range Type: One of HOUR, DAY, MONTH, YEAR
Interval: The range interval (e.g. 1,2,3,4,5, etc)

Behavior

Condition	Status
Number of rows is between `Min Row Count` and `Max Row Count`	Success ✅
Number of rows is not between `Min Row Count` and `Max Row Count	Failed ❌

YAML Config

- name: myTestName
  description: test description
  testDefinitionName: tableRowInsertedCountToBeBetween
  parameterValues:
    - name: min
      value: 10
    - name: max
      value: 100
    - name: columnName
      value: colA
    - name: rangeType
      value: DAY
    - name: rangeInterval
      value: 1

JSON Config

{
    "name": "myTestName",
    "description": "test description",
    "testDefinitionName": "tableRowInsertedCountToBeBetween",
    "parameterValues": [
        {
            "name": "min",
            "value": 10
        },
        {
            "name": "max",
            "value": 100
        },
        {
            "name": "columnName",
            "value": "colA"
        },
        {
            "name": "rangeType",
            "value": "DAY"
        },
        {
            "name": "rangeInterval",
            "value": 1
        }
    ]
}

Compare 2 Tables for Differences

Compare two tables for differences, letting you check for integrity across different services — for example, a table in Snowflake against a table in Redshift.

Only the connectors listed below are currently supported by the underlying data-diff library. Using an unsupported connector will result in a Scheme '...' currently not supported error.

Supported connectors:

Snowflake
BigQuery
Athena
Redshift
Postgres
MySQL
MSSQL
Oracle
Trino

Dimension: Consistency Properties

keyColumns: The key column to use as the key for the comparison. Resolves to the primary key (if defined) if not set
useColumns: The columns against which the comparison will done. If not provided it will use all the columns
table2: The table against which the comparison will be done. Must be the fully qualified name as defined in OpenMetadata
threshold: The threshold of different rows above which the test should fail — default to 0
where: Any where clause to pass
caseSensitiveColumns: Whether the column comparison should be case sensitive or not. Default to false.

Behavior

Condition	Status
Number of rows is greater than the threshold (default to 0)	Failed ❌
Number of rows is less than or equal to the threshold	Success ✅

YAML Config

name: myName
entityLink: '<#E::table::postgres_rds.TESTDB.snowflake_db_test.dim_data_columns>'
testDefinition: tableDiff
testSuite: postgres_rds.TESTDB.snowflake_db_test.dim_data_columns.testSuite
parameterValues:
  - name: keyColumns
    value: '["id"]'
  - name: useColumns
    value: '["name_column_name"]'
  - name: table2
    value: redshift_dbt.dev.dbt_jaffle.boolean_test
  - name: threshold
    value: 10
  - name: where
    value: id != 999
  - name: caseSensitiveColumns
    value: false

JSON Config

{
  "name": "myName",
  "entityLink": "<#E::table::postgres_rds.TESTDB.snowflake_db_test.dim_data_columns>",
  "testDefinition": "tableDiff",
  "testSuite": "postgres_rds.TESTDB.snowflake_db_test.dim_data_columns.testSuite",
  "parameterValues": [
    {
      "name": "keyColumns",
      "value": "[\"id\"]"
    },
    {
      "name": "useColumns",
      "value": "[\"name_column_name\"]"
    },
    {
      "name": "table2",
      "value": "redshift_dbt.dev.dbt_jaffle.boolean_test"
    },
    {
      "name": "threshold",
      "value": 10
    },
    {
      "name": "where",
      "value": "id != 999"
    },
    {
      "name": "caseSensitiveColumns",
      "value": false
    }
  ]
}

Table Data to Be Fresh [OpenMetadata]

Validate the freshness of a table’s data. Dimension: Accuracy Properties

column: the colummn that will be used to chech the table freshness
timeSinceUpdate: (in seconds) The data is expected to be updated within this number of seconds. If the time since the last update is greater than this value, the test will fail.

Behavior

Condition	Status
Time since update is greater than timeSinceUpdate	Failed ❌
Time since update is less than or equal to timeSinceUpdate	Success ✅

YAML Config

name: myName
entityLink: '<#E::table::postgres_rds.TESTDB.snowflake_db_test.dim_data_columns>'
testDefinition: tableDataToBeFresh
testSuite: postgres_rds.TESTDB.snowflake_db_test.dim_data_columns.testSuite
parameterValues:
  - name: column
    value: id
  - name: timeSinceUpdate
    value: 30

JSON Config

{
  "name": "myName",
  "displayName": "dim_data_columns_table_data_to_be_fresh_NeUs",
  "entityLink": "<#E::table::postgres_rds.TESTDB.snowflake_db_test.dim_data_columns>",
  "testDefinition": "tableDataToBeFresh",
  "testSuite": "postgres_rds.TESTDB.snowflake_db_test.dim_data_columns.testSuite",
  "parameterValues": [
    {
      "name": "column",
      "value": "id"
    },
    {
      "name": "timeSinceUpdate",
      "value": 30
    }
  ]
}

Next Steps

Column Tests - YAML Config

Configure column-level data quality tests including uniqueness, null checks, regex patterns, value sets, and statistical validations.

​Tests in the YAML Config

​Table Tests

​Table Row Count to Equal

​Table Row Count to be Between

​Table Column Count to Equal

​Table Column Count to be Between

​Table Column Name to Exist

​Table Column to Match Set

​Table Custom SQL Test

​Table Row Inserted Count To Be Between

​Compare 2 Tables for Differences

​Table Data to Be Fresh [OpenMetadata]

​Next Steps

Column Tests - YAML Config

Tests in the YAML Config

Table Tests

Table Row Count to Equal

Table Row Count to be Between

Table Column Count to Equal

Table Column Count to be Between

Table Column Name to Exist

Table Column to Match Set

Table Custom SQL Test

Table Row Inserted Count To Be Between

Compare 2 Tables for Differences

Table Data to Be Fresh [OpenMetadata]

Next Steps