![Postgres](/_next/image?url=%2Fimages%2Fconnectors%2Fpost.webp&w=64&q=75)
In this section, we provide guides and references to use the Postgres connector.
Configure and schedule Postgres metadata and profiler workflows from the OpenMetadata UI:
- Requirements
- Metadata Ingestion
- Query Usage
- Lineage
- Data Profiler
- Data Quality
- dbt Integration
- Enable Security
How to Run the Connector Externally
To run the Ingestion via the UI you'll need to use the OpenMetadata Ingestion Container, which comes shipped with custom Airflow plugins to handle the workflow deployment.
If, instead, you want to manage your workflows externally on your preferred orchestrator, you can check the following docs to run the Ingestion Framework anywhere.
Requirements
Note: Note that we only support officially supported Postgres versions. You can check the version list here.
Usage and Lineage considerations
When extracting lineage and usage information from Postgres we base our finding on the pg_stat_statements
table. You can find more information about it on the official docs.
Another interesting consideration here is explained in the following SO question. As a summary:
- The
pg_stat_statements
has no time data embedded in it. - It will show all queries from the last reset (one can call
pg_stat_statements_reset()
).
Then, when extracting usage and lineage data, the query log duration will have no impact, only the query limit.
Note: For usage and lineage grant your user pg_read_all_stats
permission.
Python Requirements
We have support for Python versions 3.8-3.11
To run the Postgres ingestion, you will need to install:
Metadata Ingestion
All connectors are defined as JSON Schemas. Here you can find the structure to create a connection to Postgres.
In order to create and run a Metadata Ingestion workflow, we will follow the steps to create a YAML configuration able to connect to the source, process the Entities if needed, and reach the OpenMetadata server.
The workflow is modeled around the following JSON Schema
1. Define the YAML Config
This is a sample config for Postgres:
Source Configuration - Service Connection
username: Specify the User to connect to Postgres. It should have enough privileges to read all the metadata.
authType: Choose from basic auth and IAM based auth.
Basic Auth
password: Password comes under Basic Auth type.
IAM BASED Auth
- awsAccessKeyId & awsSecretAccessKey: When you interact with AWS, you specify your AWS security credentials to verify who you are and whether you have permission to access the resources that you are requesting. AWS uses the security credentials to authenticate and authorize your requests (docs).
Access keys consist of two parts: An access key ID (for example, AKIAIOSFODNN7EXAMPLE
), and a secret access key (for example, wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
).
You must use both the access key ID and secret access key together to authenticate your requests.
You can find further information on how to manage your access keys here.
awsSessionToken: If you are using temporary credentials to access your services, you will need to inform the AWS Access Key ID and AWS Secrets Access Key. Also, these will include an AWS Session Token.
awsRegion: Each AWS Region is a separate geographic area in which AWS clusters data centers (docs).
As AWS can have instances in multiple regions, we need to know the region the service you want reach belongs to.
Note that the AWS Region is the only required parameter when configuring a connection. When connecting to the services programmatically, there are different ways in which we can extract and use the rest of AWS configurations.
You can find further information about configuring your credentials here.
endPointURL: To connect programmatically to an AWS service, you use an endpoint. An endpoint is the URL of the entry point for an AWS web service. The AWS SDKs and the AWS Command Line Interface (AWS CLI) automatically use the default endpoint for each service in an AWS Region. But you can specify an alternate endpoint for your API requests.
Find more information on AWS service endpoints.
profileName: A named profile is a collection of settings and credentials that you can apply to a AWS CLI command. When you specify a profile to run a command, the settings and credentials are used to run that command. Multiple named profiles can be stored in the config and credentials files.
You can inform this field if you'd like to use a profile other than default
.
Find here more information about Named profiles for the AWS CLI.
assumeRoleArn: Typically, you use AssumeRole
within your account or for cross-account access. In this field you'll set the ARN
(Amazon Resource Name) of the policy of the other account.
A user who wants to access a role in a different account must also have permissions that are delegated from the account administrator. The administrator must attach a policy that allows the user to call AssumeRole
for the ARN
of the role in the other account.
This is a required field if you'd like to AssumeRole
.
Find more information on AssumeRole.
assumeRoleSessionName: An identifier for the assumed role session. Use the role session name to uniquely identify a session when the same role is assumed by different principals or for different reasons.
By default, we'll use the name OpenMetadataSession
.
Find more information about the Role Session Name.
assumeRoleSourceIdentity: The source identity specified by the principal that is calling the AssumeRole
operation. You can use source identity information in AWS CloudTrail logs to determine who took actions with a role.
Find more information about Source Identity.
hostPort: Enter the fully qualified hostname and port number for your Postgres deployment in the Host and Port field.
database: Initial Postgres database to connect to. If you want to ingest all databases, set ingestAllDatabases to true.
ingestAllDatabases: Ingest data from all databases in Postgres. You can use databaseFilterPattern on top of this.
Source Configuration - Source Config
The sourceConfig
is defined here:
markDeletedTables: To flag tables as soft-deleted if they are not present anymore in the source system.
markDeletedStoredProcedures: Optional configuration to soft delete stored procedures in OpenMetadata if the source stored procedures are deleted. Also, if the stored procedures is deleted, all the associated entities like lineage, etc., with that stored procedures will be deleted.
includeTables: true or false, to ingest table data. Default is true.
includeViews: true or false, to ingest views definitions.
includeTags: Optional configuration to toggle the tags ingestion.
includeOwners: Set the 'Include Owners' toggle to control whether to include owners to the ingested entity if the owner email matches with a user stored in the OM server as part of metadata ingestion. If the ingested entity already exists and has an owner, the owner will not be overwritten.
includeStoredProcedures: Optional configuration to toggle the Stored Procedures ingestion.
includeDDL: Optional configuration to toggle the DDL Statements ingestion.
queryLogDuration: Configuration to tune how far we want to look back in query logs to process Stored Procedures results.
queryParsingTimeoutLimit: Configuration to set the timeout for parsing the query in seconds.
useFqnForFiltering: Regex will be applied on fully qualified name (e.g service_name.db_name.schema_name.table_name) instead of raw name (e.g. table_name).
databaseFilterPattern, schemaFilterPattern, tableFilterPattern: Note that the filter supports regex as include or exclude. You can find examples here
threads (beta): The number of threads to use when extracting the metadata using multithreading. Please take a look here before configuring this.
incremental (beta): Incremental Extraction configuration. Currently implemented for:
Sink Configuration
To send the metadata to OpenMetadata, it needs to be specified as type: metadata-rest
.
Workflow Configuration
The main property here is the openMetadataServerConfig
, where you can define the host and security provider of your OpenMetadata installation.
Logger Level
You can specify the loggerLevel
depending on your needs. If you are trying to troubleshoot an ingestion, running with DEBUG
will give you far more traces for identifying issues.
JWT Token
JWT tokens will allow your clients to authenticate against the OpenMetadata server. To enable JWT Tokens, you will get more details here.
You can refer to the JWT Troubleshooting section link for any issues in your JWT configuration.
Store Service Connection
If set to true
(default), we will store the sensitive information either encrypted via the Fernet Key in the database or externally, if you have configured any Secrets Manager.
If set to false
, the service will be created, but the service connection information will only be used by the Ingestion Framework at runtime, and won't be sent to the OpenMetadata server.
Store Service Connection
If set to true
(default), we will store the sensitive information either encrypted via the Fernet Key in the database or externally, if you have configured any Secrets Manager.
If set to false
, the service will be created, but the service connection information will only be used by the Ingestion Framework at runtime, and won't be sent to the OpenMetadata server.
SSL Configuration
If you have added SSL to the OpenMetadata server, then you will need to handle the certificates when running the ingestion too. You can either set verifySSL
to ignore
, or have it as validate
, which will require you to set the sslConfig.caCertificate
with a local path where your ingestion runs that points to the server certificate file.
Find more information on how to troubleshoot SSL issues here.
Advanced Configuration
Connection Options (Optional): Enter the details for any additional connection options that can be sent to database during the connection. These details must be added as Key-Value pairs.
Connection Arguments (Optional): Enter the details for any additional connection arguments such as security or protocol configs that can be sent to database during the connection. These details must be added as Key-Value pairs.
- In case you are using Single-Sign-On (SSO) for authentication, add the
authenticator
details in the Connection Arguments as a Key-Value pair as follows:"authenticator" : "sso_login_url"
The sslConfig and sslMode are used to configure the SSL (Secure Sockets Layer) connection between your application and the PostgreSQL server. PostgreSQL will require only rootCertificate i.e caCertificate.
caCertificate: This is the path to the CA (Certificate Authority) certificate file. This file is used to verify the server’s certificate.
sslMode: This field controls whether a secure SSL/TLS connection will be negotiated with the server. There are several modes you can choose:
disable: No SSL/TLS encryption will be used; the data sent over the network is not encrypted. allow: The driver will try to negotiate a non-SSL connection but if the server insists on SSL, it will switch to SSL. prefer (the default): The driver will try to negotiate an SSL connection but if the server does not support SSL, it will switch to a non-SSL connection. require: The driver will try to negotiate an SSL connection. If the server does not support SSL, the driver will not fall back to a non-SSL connection. verify-ca: The driver will negotiate an SSL connection and verify that the server certificate is issued by a trusted certificate authority (CA). verify-full: The driver will negotiate an SSL connection, verify that the server certificate is issued by a trusted CA and check that the server host name matches the one in the certificate.
2. Run with the CLI
First, we will need to save the YAML file. Afterward, and with all requirements installed, we can run:
Note that from connector to connector, this recipe will always be the same. By updating the YAML configuration, you will be able to extract metadata from different sources.
Query Usage
The Query Usage workflow will be using the query-parser
processor.
After running a Metadata Ingestion workflow, we can run Query Usage workflow. While the serviceName
will be the same to that was used in Metadata Ingestion, so the ingestion bot can get the serviceConnection
details from the server.
1. Define the YAML Config
This is a sample config for BigQuery Usage:
Source Configuration - Source Config
You can find all the definitions and types for the sourceConfig
here.
queryLogDuration: Configuration to tune how far we want to look back in query logs to process usage data.
stageFileLocation: Temporary file name to store the query logs before processing. Absolute file path required.
resultLimit: Configuration to set the limit for query logs
queryLogFilePath: Configuration to set the file path for query logs
Processor, Stage and Bulk Sink Configuration
To specify where the staging files will be located.
Note that the location is a directory that will be cleaned at the end of the ingestion.
Workflow Configuration
The main property here is the openMetadataServerConfig
, where you can define the host and security provider of your OpenMetadata installation.
Logger Level
You can specify the loggerLevel
depending on your needs. If you are trying to troubleshoot an ingestion, running with DEBUG
will give you far more traces for identifying issues.
JWT Token
JWT tokens will allow your clients to authenticate against the OpenMetadata server. To enable JWT Tokens, you will get more details here.
You can refer to the JWT Troubleshooting section link for any issues in your JWT configuration.
Store Service Connection
If set to true
(default), we will store the sensitive information either encrypted via the Fernet Key in the database or externally, if you have configured any Secrets Manager.
If set to false
, the service will be created, but the service connection information will only be used by the Ingestion Framework at runtime, and won't be sent to the OpenMetadata server.
Store Service Connection
If set to true
(default), we will store the sensitive information either encrypted via the Fernet Key in the database or externally, if you have configured any Secrets Manager.
If set to false
, the service will be created, but the service connection information will only be used by the Ingestion Framework at runtime, and won't be sent to the OpenMetadata server.
SSL Configuration
If you have added SSL to the OpenMetadata server, then you will need to handle the certificates when running the ingestion too. You can either set verifySSL
to ignore
, or have it as validate
, which will require you to set the sslConfig.caCertificate
with a local path where your ingestion runs that points to the server certificate file.
Find more information on how to troubleshoot SSL issues here.
2. Run with the CLI
After saving the YAML config, we will run the command the same way we did for the metadata ingestion:
Lineage
After running a Metadata Ingestion workflow, we can run Lineage workflow. While the serviceName
will be the same to that was used in Metadata Ingestion, so the ingestion bot can get the serviceConnection
details from the server.
1. Define the YAML Config
This is a sample config for BigQuery Lineage:
Source Configuration - Source Config
You can find all the definitions and types for the sourceConfig
here.
queryLogDuration: Configuration to tune how far we want to look back in query logs to process lineage data in days.
parsingTimeoutLimit: Configuration to set the timeout for parsing the query in seconds.
filterCondition: Condition to filter the query history.
resultLimit: Configuration to set the limit for query logs.
queryLogFilePath: Configuration to set the file path for query logs.
databaseFilterPattern: Regex to only fetch databases that matches the pattern.
schemaFilterPattern: Regex to only fetch tables or databases that matches the pattern.
tableFilterPattern: Regex to only fetch tables or databases that matches the pattern.
- You can learn more about how to configure and run the Lineage Workflow to extract Lineage data from here
2. Run with the CLI
After saving the YAML config, we will run the command the same way we did for the metadata ingestion:
Data Profiler
The Data Profiler workflow will be using the orm-profiler
processor.
After running a Metadata Ingestion workflow, we can run Data Profiler workflow. While the serviceName
will be the same to that was used in Metadata Ingestion, so the ingestion bot can get the serviceConnection
details from the server.
1. Define the YAML Config
This is a sample config for the profiler:
Source Configuration - Source Config
You can find all the definitions and types for the sourceConfig
here.
generateSampleData: Option to turn on/off generating sample data.
profileSample: Percentage of data or no. of rows we want to execute the profiler and tests on.
threadCount: Number of threads to use during metric computations.
processPiiSensitive: Optional configuration to automatically tag columns that might contain sensitive information.
confidence: Set the Confidence value for which you want the column to be marked
timeoutSeconds: Profiler Timeout in Seconds
databaseFilterPattern: Regex to only fetch databases that matches the pattern.
schemaFilterPattern: Regex to only fetch tables or databases that matches the pattern.
tableFilterPattern: Regex to only fetch tables or databases that matches the pattern.
Processor Configuration
Choose the orm-profiler
. Its config can also be updated to define tests from the YAML itself instead of the UI:
tableConfig: tableConfig
allows you to set up some configuration at the table level.
Sink Configuration
To send the metadata to OpenMetadata, it needs to be specified as type: metadata-rest
.
Workflow Configuration
The main property here is the openMetadataServerConfig
, where you can define the host and security provider of your OpenMetadata installation.
Logger Level
You can specify the loggerLevel
depending on your needs. If you are trying to troubleshoot an ingestion, running with DEBUG
will give you far more traces for identifying issues.
JWT Token
JWT tokens will allow your clients to authenticate against the OpenMetadata server. To enable JWT Tokens, you will get more details here.
You can refer to the JWT Troubleshooting section link for any issues in your JWT configuration.
Store Service Connection
If set to true
(default), we will store the sensitive information either encrypted via the Fernet Key in the database or externally, if you have configured any Secrets Manager.
If set to false
, the service will be created, but the service connection information will only be used by the Ingestion Framework at runtime, and won't be sent to the OpenMetadata server.
Store Service Connection
If set to true
(default), we will store the sensitive information either encrypted via the Fernet Key in the database or externally, if you have configured any Secrets Manager.
If set to false
, the service will be created, but the service connection information will only be used by the Ingestion Framework at runtime, and won't be sent to the OpenMetadata server.
SSL Configuration
If you have added SSL to the OpenMetadata server, then you will need to handle the certificates when running the ingestion too. You can either set verifySSL
to ignore
, or have it as validate
, which will require you to set the sslConfig.caCertificate
with a local path where your ingestion runs that points to the server certificate file.
Find more information on how to troubleshoot SSL issues here.
- You can learn more about how to configure and run the Profiler Workflow to extract Profiler data and execute the Data Quality from here
2. Run with the CLI
After saving the YAML config, we will run the command the same way we did for the metadata ingestion:
Note now instead of running ingest
, we are using the profile
command to select the Profiler workflow.
Data Quality
Adding Data Quality Test Cases from yaml config
When creating a JSON config for a test workflow the source configuration is very simple.
The only sections you need to modify here are the serviceName
(this name needs to be unique) and entityFullyQualifiedName
(the entity for which we'll be executing tests against) keys.
Once you have defined your source configuration you'll need to define te processor configuration.
The processor type should be set to "orm-test-runner"
. For accepted test definition names and parameter value names refer to the tests page.
Note that while you can define tests directly in this YAML configuration, running the workflow will execute ALL THE TESTS present in the table, regardless of what you are defining in the YAML.
This makes it easy for any user to contribute tests via the UI, while maintaining the test execution external.
You can keep your YAML config as simple as follows if the table already has tests.
Key reference:
forceUpdate
: if the test case exists (base on the test case name) for the entity, implements the strategy to follow when running the test (i.e. whether or not to update parameters)testCases
: list of test cases to add to the entity referenced. Note that we will execute all the tests present in the Table.name
: test case nametestDefinitionName
: test definitioncolumnName
: only applies to column test. The name of the column to run the test againstparameterValues
: parameter values of the test
The sink
and workflowConfig
will have the same settings as the ingestion and profiler workflow.
Full yaml
config example
How to Run Tests
To run the tests from the CLI execute the following command
Securing Postgres Connection with SSL in OpenMetadata
To configure SSL for secure connections between OpenMetadata and a PostgreSQL database, PostgreSQL offers various SSL modes, each providing different levels of connection security.
When running the ingestion process externally, specify the SSL mode to be used for the PostgreSQL connection, such as prefer
, verify-ca
, allow
, and others. Once you've chosen the SSL mode, provide the CA certificate for SSL validation (caCertificate
). Only the CA certificate is required for SSL validation in PostgreSQL.
For IAM authentication, it is recommended to select the allow
mode or another SSL mode that aligns with your specific needs.
dbt Integration
You can learn more about how to ingest dbt models' definitions and their lineage here.